The Function of Wave Soldering Preheating System

 

High quality DIP wave soldering machine, wave soldering, wave soldering equipment, can be PC control, very good DIP Soldering.

As a station in the wave soldering equipment system, the preheating system has the following functions in practical applications:

1. Promote the full play of flux activity. The flux-coated PCB needs to be heated to the activation temperature to cause the chemical composition to interact with the matrix metal oxide to remove the metal surface oxide, (such as the rosin-based flux needs to be heated to about 104 ℃), and need to be at this temperature Stay for a sufficient time to ensure that the flux can fully purify the soldered surface of the PCB, so it is necessary to preheat for a sufficient time before soldering.

2. Remove the excessive volatiles in the flux to improve the welding quality. 

3. Reduce the thermal shock during wave soldering. The preheating can gradually and uniformly heat the PCB temperature, thereby minimizing the thermal shock during wave soldering, easing thermal stress, minimizing the warpage and deformation of the PCB, and improving the mechanical flatness of the PCB.

4. Reduce the thermal degradation of components. Due to the pre-heating, the thermal shock during wave soldering can be reduced to a minimum, thereby minimizing the risk of damage to thermal components.

5. Improve production efficiency. The pre-heat treatment also shortens the time required to heat the PCB to the wetting temperature during the wave soldering process, thereby accelerating the wave soldering process and improving the production efficiency.

❙ Wave Soldering Machine Video