ETA lead free Wave Soldering Mahine
From: Author: Publish time:2019-03-02 14:42 Clicks:0
Hi, Thanks for your visiting.
Today we introduce our wave Soldering Machine to you.
Wave soldering is suitable for hand plug board and dispensing board, and requires all components to be heat-resistant. Wave soldering to spray flux, and then through the preheating, welding, cooling zone. In addition. A wave soldering machine is divided into spray, preheating, tin furnace, cooling four parts.
W series lead-free wave soldering machine is a cost-effective product, suitable for large and small batch production.
The main features：
This machine have double hook claw L finger and Hook finger,
customer can choose any of them or mixed them.
2.Fulx Spray System
a.Step motor control,make sure the spray nozzle moving
at needed speed smoothly.
b.Spray Pressure 0.25Mpa--0.4Mpa, Flux flow 10--100 ml/min.
3. Preheating System
3.1. Hot air preheating, PID + SSR control mode.
3.2. Standard equipped with 4 hot air preheating zone, procide enough heat to active the flux performance.
4. Soldering System
4.1. Solder Pot Material Full Titanium (Standard FT).
4.2. Solder pot capacity Lead-free 250kg.
4.3. Two wave nozzle, one is for turbulent wave and another is for flat wave,
and solder pot in & out automatically, upper & down automatically.
5. Cooling System
Cooling wave soldering after pcba soldering